Sensorex offers a wide selection of contacting process conductivity sensors. Choose from low cost models, a variety of 316SS models and non-contacting toroidal (inductive) type cells.
1. Low cost graphite
and plastic models Sensorex durable epoxy body CS150 conductivity sensors are supplied with graphite measuring surfaces. Optional ATC elements can be matched to the specific conductivity meter requirement. In-line or submersion mounting can be accomplished with use of our low cost 1/2" or 3/4" mounting glands. Use the threads to install the sensor into a tee, or reverse the fitting and use the threads to connect to a pipe coupling. Choose 0.1 or 1.0 Cell K. The basic unit is supplied with a 30" cable and tinned lead connections. Specify special cable length and connector requirements when ordering.
2. Stainless steel
boiler sensorsMultiple 316SS conductivity sensors are available. The boiler sensors are designed for operating conditions up to 200 degrees C and 250 psig. For general applications both 3/4" NPT and 1/2" NPT models are available. For high pressure applications the HP series will handle pressures up to 300 psig at 100 degrees C.
Sensorex boiler conductivity sensors use 3/4" male NPT threads, and both the body and the measuring pin are constructed of 316 stainless steel. They feature a special thermally resistant PEEK insert and high temperature "O" rings. Two models are available, and each model may be ordered with or without ATC elements depending upon your application requirements. The CS675HT and CS675HTTC feature a 1" insertion depth beyond the 3/4" MNPT threads. The models CS676HT and CS675HTTC provide 3" insertion depth past the 3/4" MNPT threads. All boiler probes are supplied with 6" Teflon coated leads for Junction Box connection and extension. Cell K value of 1.0 is standard. Longer cable lengths can be supplied at additional cost.
3. Toroidal
sensors Resists fouling and coatings which cause problems with normal contacting cells. The TCS series toroidal sensors conductivity sensor provides a non-contacting, inductive type conductivity measurement over a wide measuring range from 0 - 2,000,000 uS. The new TCS3000 cells can be connected directly to many toroidal controllers and transmitters manufactured by Rosemount, Foxboro and many others. They are ideal for higher range conductivity measurements. Measurements can be made in samples from concentrated acids to microsiemen water with the same cell. Fouling and coatings are eliminated (or at least substantially reduced) with non-contacting cells . They will provide long term, trouble free operation. All toroidal sensors are submersion ready to mount in tanks. Our standard Noryl TCS3000 and TCS3020 sensors can be mounted in-line with our unique 2" keyed CPVC flow cell.
