The ozone sensor
consists of an amperometric sensor assembly and a flow
cell. The sensor is capable of measuring disinfectant in
clean water contaminated with debris due to the unique
flow cell design. The sensor assembly includes the
sensor body with 6 meters (20 feet) off cable,
replaceable membrane cap, a 6 ml bottle of electrolyte
fill solution, a clip ring and an o-ring. The oxidiser
molecules diffuse through the membrane and in the acidic
environment of the electrolyte fill solution, a redox
reaction occurs at the electrodes in the sensor. The
current generated by this reaction is converted to a
robust voltage signal that is linear with the
concentration of the oxidiser
Summary of features
WDIS sensors
• long-lasting amperometric electrodes with rugged membranes
• integrated temperature compensation
• relatively insensitive to changes in sample flow rates
• large flow cell openings which prevent clogging
• excellent long-term stability
WDIS controllers
• versatile relay configuration. Control outputs can be set as high or low set points via key-pad. Auxiliary outputs can be set as: high
• alarm, low alarm, in-range or out- of range output and probe wash
• programmable access code
• display shows at a glance the free chlorine, chlorine dioxide, peracetic acid or ozone values, analog graph relative to set points and
• status of alarms, outputs
• self diagnostics constantly monitor software and electronics whilst in operation
Sensor specifications
